Altusen Terminal Server - Serial Port Configuration
Last modified by Administrator on 2011/06/06 17:26
Altusen Terminal Server - Serial Port Configuration
- Click Port Configuration
- Click radio button next to COM1 (or COM2, or COM16). Click Property Settings
- Edit the fields as shown in the picture:
- Make sure that Operating Mode is set to Console Management Direct; and Online Detect is set to None.
- Attach a cable to the Altusen device and its networking port. Attach another end of the cable to a serial port device, e.g. ProxySG.
- Run the following telnet command from DOS (assume that Altusen device has IP=10.120.29.125 and the port #2 is being used):
telnet 10.120.29.125 5002
- Do not feel tempted to press Ctrl+D as it may distrupt the normal operation of the port for a long time. Just press Enter a couple of times. Wait for the device serial port to respond. Enjoy.
Tags:
